How to Check Fault Codes on a Shanghai Mitsubishi 003 Series Elevator

How to Check Fault Codes on a Shanghai Mitsubishi 003 Series Elevator

Set parameter MON1 to position 1 and MON2 to position 0; the three-digit digital display will then show the fault code.
If the equipment is operating normally, the display will show 000.
If a fault occurs, a three-digit error code will appear.

Magnet Learning Procedure
Before starting, park the elevator car at a middle floor in the hoistway.

Set SATE1 to position 0 and SATE0 to position D.

Press the SW1 button twice.
When the screen displays “P” followed by a two-digit number,
it means the system has entered magnet learning mode.

Operate the elevator up and down using the inspection handle.
The system will automatically complete the learning process.
When the display returns to the floor number, the magnet learning is complete.

Finally, set SATE1 back to position 0 and SATE0 to position 8. Press the SW1 button twice again to exit learning mode.

WhatsApp: 8618192988423
E-mail: yqwebsite@eastelevator.cn