The Universal Moving Walk Step Chain 133.33mm is a key transmission component for moving walk systems installed in shopping malls, airports, railway stations, supermarkets, and other high-traffic public facilities.
| Brand | Type | Pitch | Inner chain plate | Outer chain plate | Shaft diameter | Roller |
| P | h2 | h1 | d2 | |||
| General | R133A | 133.33mm | 5*40mm | 5*40mm | 14.63mm | 70*25-6204 |
| R133B | 76*22-6204 | |||||
| R133C | 70*22-6204 |
Escalator step chain
40Cr steel & TPU material sprockets available in multiple specifications & applicable to multiple brands of escalators
Both moving walk chains and escalator step chains can use a nominal pitch of 133.33mm. However, pitch alone does not establish interchangeability.
A moving walk transports continuous pallets rather than individual escalator steps. Depending on the equipment design, the chain may use dedicated attachment pins, extended pins, or other pallet-connection arrangements.
The distance between pallet attachment points may span multiple chain pitches. For example, three pitches equal approximately 399.99mm, while four pitches equal approximately 533.32mm. These are dimensional examples only; the actual pallet spacing must be verified for the specific system.
A conventional escalator step chain should not be substituted for a moving walk chain unless its attachment geometry and all relevant dimensions are confirmed compatible.
Moving walk chains must support the loads transmitted through the pallet system while following the equipment's drive and guide arrangements. Roller size, spacing, bearing configuration, and load capacity vary by design.
Do not assume that a moving walk chain always has more rollers or a higher load rating than an escalator chain of the same pitch. Compare the original specifications and operating requirements before selecting a replacement.
Not necessarily. Moving walks use pallets rather than conventional escalator steps, and their chain attachment arrangements and roller configurations may differ.
Selected systems from KONE, Fujitec, Schindler, Canny, Toshiba, SJEC, and TKE may use compatible chain configurations. Exact compatibility depends on the machine model and mechanical dimensions.
Replacement decisions should be based on measured wear, chain elongation, roller and bearing condition, attachment integrity, and the manufacturer's maintenance limits.
We have three strategically located warehouses in Saudi Arabia, Jiangsu, and Xi'an, ensuring stable inventory and fast delivery to meet global customer demands.
We accept T/T, Western Union, Alipay, and other common payment methods, providing flexible options for our global customers.
Yes, most products come with a 1 year warranty.
Yes, we ship worldwide via DHL, FedEx, UPS, air freight, or sea freight, depending on your needs and urgency.
Yes, our experienced team provides pre-sales selection support and after-sales technical assistance to help ensure correct installation and operation.