Elevator host encoder HEIDENHAIN ERN1387 204862S14-70 elevator parts

Installation Precautions
1. When installing the encoder, gently push it into the sleeve shaft. Hammering and collision are strictly prohibited to avoid damaging the shaft system and code plate.
2. Please pay attention to the allowable shaft load when installing, and the limit load must not be exceeded.
3. Do not exceed the limit speed. If the limit speed allowed by the encoder is exceeded, the electrical signal may be lost.
4. Please do not wind the encoder's output line and power line together or transmit them in the same pipeline, nor should they be used near the distribution board to prevent interference.
5. Before installation and startup, you should carefully check whether the product wiring is correct. Wrong wiring may cause damage to the internal circuit.
6. If you need an encoder cable, please confirm the brand of the inverter and the length of the cable.